Tribe.net. Local Connections crazylover http://CH3CH2CH3.tribe.net/thread/bc504b17-81bb-47f6-85c6-75ef2ee8be38#a4dfa4a0-c784-4982-b89d-19447383603d 2006-02-11T02:43:41Z 2006-02-11T02:43:41Z

many internet page pretend to give you the formula of Napalm ... and they tells you how to make it with Polystyren and Gasoline ... Bulshit ! ! ! ! Yes, theire is a Napalm formula which uses polistyrene, BUT not only polistyrene : there is too some Benzene added ! Gasoline alone will not dissolves enought the polystyrene ! Then, This Napalm is not really Napalm, it is Napalm B, and Napalm B is impossible to use to play or to have fun : it is very difficult to light, more than 3800 °C are needed ! Military uses Thermite to lignt this Napalm B, or Super Napalm. In facts, the Napalm B is only good for Big Bombs, not for flamthrowers and for fun ! The REAL Napalm is made with the Following methode, save it on your computer, because you know what ? It is very very difficult , perhaps impossible, to find on the Internet ! But is the the real process, it works and I tried it myself ! It is an easy reaction, with a littre knowledge ( a good studend can do it ) : The REAL NAPALM synthesis : 25 grams of cocoanut oil fatty acids ( = Lauric acid ), 12.5 grams of naphthenic acid and 12.5 grams of oleic acid were melted together and added to 1000 cc ( = 1000 ml ) of water containing 11.5 grams of 95% powdered sodium hydroxide . The solution is heated to 150 °F ( = 66 °C ) and stirred for ten minutes. 5 grams of activated carbon are added and the stirring continue for five minutes. The solution is then filtered and the clear filtrate is cooled to room temperature. 10 grams of a diatomaceous earth sold under the trade name “ Celite ” are added to the cooled, clear filtrate. 37 grams of Al2(SO4)318H2O ( = Aluminum sulfate octadecahydrate ) are dissolved in 100 cc ( = 100 ml ) of water and then slowly added to the clear filtrate containing the “ Celite ” . A Napalm Celite mixture precipitate. This mixture is filtered and transferred to a beaker with clean water and 5 grams more of Celite added with stirring. The mixture is filtered and the filtered cake washed and dried in an oven at 50 °C. The final product is now obtained : the powdered Napalm Celite mixture, ready to use ! The dried product obtained is very fine and broke up easily into a fine , uniform, light powder. This fine powdery Napalm Celite mixture proved very excellent for the gelling of gasoline. Conventional amounts will gel aviation gasoline in 23 seconds at 70 °F ( = 21 °C ) and five minutes and 55 seconds at 32 °F ( = 0 °C ) No additive such xylenol is needed to aid in the gelling Use of Napalm: The name Napalm to describe Gelled Gasoline is incorrect. In fact, Napalm is the powder used to gel gasoline, and not the final product ! Napalm is a thickener, it is important to understand that ! Then, to make GELLED GASOLINE, we add powdered Napalm ( 6 % to 12 % ) to Gasoline , and we stirre for few minuts until the Gel forms. Exemple : mixe 60 grams of Napalm powder with approximately 1 litter ( 1000 ml ) of Gasoline to obtain around 1 kg of Gelled Gasoline. 6 % Napalm is use in Flamethrowers, or Molotov Cocktails 12 % Napalm is use in Incendiary Bomb ( The Gasoline used must be without any water in to obtain a good result. )

crazylover 2006-02-11T02:43:41Z